The front sight dovetail cut is made using Brownells 0.245” x 60° sight insert cutter (carbide cutter highly recommend).
- 1) Mill the existing front blade off down to the rib
- 2) Drop down 0.030” and mill off the rib about 0.375” back from the front of the slide
- 3) Center up on that flat (front to rear) with the dovetail cutter zeroed depth wise
- 4) Drop down 0.045-0.050” and cut the dovetail slot
Link to XS written Installation Instructions
WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov